50kg hopper type plastic dryer Injection Molding Machine Plastic Dryer Hot Drying Oven 220V

Introduction: <br> Product Parameter: <br> 1. Capacity: 50kg<br> 2. Voltage: AC220V<br> 3. Motor: 4.5kw<br> 4. Package size: 34*21*47 in<br> 5. Weight: 99lb (45kg)<br><br> Note:<br> 1. This product needs to be connected to the two-phase 220v plug by itself.<br> 2. The location of the installation machine needs to consider other equipment, material stacking, it is recommended to keep appropriate space around.<br> 3. The working environment of the machine requires a clean and tidy room.When drying raw materials that may produce poisonous gas, please reserve space for installation of exhaust system.<br><br> Uniform distribution of hot air:<br> high thermal effciency, greatly shorten the drying time.<br> Accurate temperature control:<br> the use of high-precision temperature regulator, eliminate temperature error.<br> Save time and manpower:<br> the barrel and the base separate design, convenient material dleaning, simple and rapid refueling.<br> Very reliable design:<br> beautiful and firm, easy installation, multiple safety devices to ensure safety.<br> Increase injection efficiency:<br> direct blanking, shorten raw material dissolution time and improve injection efficiency.<br><br> Item include（029264）:<br> 50kg hopper type plastic dryer

• Working principle: through the fan supply air, blowing to the heating tube in the heating cylinder, and then controlled by the temperature controller air supply temperature, uniform flow in the drying drum, to the purpose of drying.
• The contact part of the machine and raw materials are made of stainless steel, so that the raw materials are not contaminated.
• The heating tube is elbow type, effectively prevent dust accumulation.
• This machine has uniform hot air distribution, high drying efficiency, temperature controller adopts proportional deviation type, temperature difference is controlled within plus or minus 3 degrees.
• The machine can dry the raw materials which are wet due to packaging and transportation, and is used to remove the moisture on the surface. It is suitable for PP, PE, ABS, PVC and other raw materials.